Virtual Transportation Center

  • Welcome to Virtual Transportation Center. Please login or sign up.
 

Cayuga USA v0.8 Released!

Started by Dash5155, December 14, 2016, 07:07:12 pm

0 Members and 6 Guests are viewing this topic.

Metro4050

I installed the whole map.  The AI list isn't messed up, the game, for whatever reason, does not recognize "Keystone City Standard Buses" when reading from the .ttl files.  I'm just going to make them CANTA buses and be done with it. 


Dash5155

Quote from: Metro4050 on February 08, 2020, 08:31:37 pmI installed the whole map.  The AI list isn't messed up, the game, for whatever reason, does not recognize "Keystone City Standard Buses" when reading from the .ttl files.  I'm just going to make them CANTA buses and be done with it. 
I'll change something in the global file and see if it fixes it next update. People really need to report their problems to me (thanks for saying something by the way). Because stuff like that slips by me unless it's reported.

Anyways, I will make an update sometime before Monday and I'll have that line changed and if it fixed it for you, I'm grateful.


Chris4078

Great job with what you did with the express run option I like the fact that there's split shifts keep up the great work

SRTXGAMES

Can You Continue Adding Tracks Between 63rd & Mallard Loop & 58th & Baltimore? So Route 46 Can Be Done With A Tram Fully Instead Of Only As Far As Callowhill Depot.

isaacr26a

Hey dash, how can I change the Xcelsior destination signs to LED White?


Markell

I have no idea what's going on. I receive a popup error after loading the environmental.

valor

Quote from: Markell on February 09, 2020, 08:19:20 pmI have no idea what's going on. I receive a popup error after loading the environmental.

did you install the required additional scenery and splines?

Markell

Quote from: valor on February 09, 2020, 08:21:57 pmdid you install the required additional scenery and splines?
Yes I did

Dash5155

Quote from: valor on February 09, 2020, 08:21:57 pmdid you install the required additional scenery and splines?
Quote from: Markell on February 09, 2020, 09:19:09 pmYes I did
Yeah according to the log file you're not missing anything, apparently the issue is with the BMO Objeket pack. I don't understand why but otherwise the map should be fine. I'd recommend you lower your settings and use the reduced AI because you don't have what I use in the AI list.

I see I have to change that as well because I didn't add recommended the proper AI lists like I thought I did.

Dash5155

Quote from: SRTXGAMES on February 09, 2020, 07:45:31 pm Can You Continue Adding Tracks Between 63rd & Mallard Loop & 58th & Baltimore? So Route 46 Can Be Done With A Tram Fully Instead Of Only As Far As Callowhill Depot.
I might. But I need the tracks to end at the depot for now until I can figure out how to run trams myself. When the West Busway is finished, I will add in tracks to Along it, as well as some connector tracks on 60th Street.
Quote from: isaacr26a on February 09, 2020, 08:02:30 pmHey dash, how can I change the Xcelsior destination signs to LED White?
I have no idea. It depends on which version you have honestly, but changing that won't really change how you Cayuga.
Quote from: Chris4078 on February 09, 2020, 03:47:48 amGreat job with what you did with the express run option I like the fact that there's split shifts keep up the great work
Thanks!! Appreciate the compliment!!

wxman4life

Quote from: Dash5155 on February 02, 2020, 02:52:34 amI can't do that, the map is a pretty heafty file to download, I don't even have enough google drive space to put it there


Also, I re-uploaded the pack. Thanks to nobody for reporting that the map folder structure was completely off. This pack is almost exactly the same as the one released before with one or two changes.
I did notice, but wasn't 100% if it was intentionally done, but all I did was make a folder and put the files inside it and got it to work with no problems!  I love this version of the map, keep up the great work bro!!  Just a quick question, I want to make sure that I'm not missing anything, but I can't get the IBIS codes to work on the Xcelsior buses, so I don't get announcements on those buses. 

htownman25

Quote from: wxman4life on February 10, 2020, 01:51:04 amI did notice, but wasn't 100% if it was intentionally done, but all I did was make a folder and put the files inside it and got it to work with no problems!  I love this version of the map, keep up the great work bro!!  Just a quick question, I want to make sure that I'm not missing anything, but I can't get the IBIS codes to work on the Xcelsior buses, so I don't get announcements on those buses. 

I also noticed and did exactly what you did=>Make a folder, put the files in that folder, and voila!

The IBIS codes should be working.  Are you sure you have the correct .hof file for the Xcelsior?  If you took the .hof file from the DBC bus, that's the reason why it may not be working.  Take the .hof file from the Gillig Advantage (non-DBC) and put that with any other bus you'll see/use in Cayuga.

Chris4078

Just a quick thought if the ibis codes are working what is the codes for the Lakeland shuttles A/B/C/D/E 🤔

Dash5155

Quote from: Chris4078 on February 11, 2020, 01:21:05 amJust a quick thought if the ibis codes are working what is the codes for the Lakeland shuttles A/B/C/D/E 🤔

Quote from: Dash5155 on January 31, 2020, 04:31:36 am
  • Merged all lettered routes into route 214 on the .hof files


Chris4078

So I would put 214 an then 01 an so on like the 14

wxman4life

Quote from: htownman25 on February 10, 2020, 11:29:52 pmI also noticed and did exactly what you did=>Make a folder, put the files in that folder, and voila!

The IBIS codes should be working.  Are you sure you have the correct .hof file for the Xcelsior?  If you took the .hof file from the DBC bus, that's the reason why it may not be working.  Take the .hof file from the Gillig Advantage (non-DBC) and put that with any other bus you'll see/use in Cayuga.

Thanks, that is what I likely did, I used a non-DBC .hof file.

htownman25

Quote from: Chris4078 on February 11, 2020, 01:39:49 amSo I would put 214 an then 01 an so on like the 14

Yes.

If you have the time and patience, you can go into the .hof file for buses like the Gillig Advantage (not the DBC .hof file) and see which is which.  Just open it via notepad and search for "214" and voila.

You can also go by the other option you wanna do - well - you just said it.

Good luck!

thatleodj92

great map by the way
question.. how get the busstops back on the map ??

Dpflames

There is a helper missing at Phillips and Main for route 124.

Markell

Quote from: Dash5155 on February 09, 2020, 09:49:18 pmYeah according to the log file you're not missing anything, apparently the issue is with the BMO Objeket pack. I don't understand why but otherwise the map should be fine. I'd recommend you lower your settings and use the reduced AI because you don't have what I use in the AI list.

I see I have to change that as well because I didn't add recommended the proper AI lists like I thought I did.
In regards to the reduced AI, I clicked that option in my settings, but still no AI buses on the map. I'm uneducated on how to modify the AI list.

Dash5155

Quote from: Markell on February 14, 2020, 05:29:39 pmIn regards to the reduced AI, I clicked that option in my settings, but still no AI buses on the map. I'm uneducated on how to modify the AI list.
Get the New Flyer powertrain mod from the downloads.

Dash5155

So I was working on the map, but very sporadically, and made it so that buses can access a new Busway from the following points:

20th Street, 28th Street, 36th Street, 40th Street.

I may re-route the 31 to run via this busway from 36th to 46th before releasing the update.

I can't give a release date because in real life I work two jobs, and literally only work on the map once a week if even that, so I'm not even sure if it would be out this month. But I just want you guys to know it's not quite dead. I will do a live stream Tuesday showing updates and stuff and will probably have a clearer understanding of the release dates..

htownman25

Looking forward in seeing any updates during the stream.

MillerRichard1


Dpflames

Quote from: Dash5155 on March 02, 2020, 06:43:19 amSo I was working on the map, but very sporadically, and made it so that buses can access a new Busway from the following points:

20th Street, 28th Street, 36th Street, 40th Street.

I may re-route the 31 to run via this busway from 36th to 46th before releasing the update.

I can't give a release date because in real life I work two jobs, and literally only work on the map once a week if even that, so I'm not even sure if it would be out this month. But I just want you guys to know it's not quite dead. I will do a live stream Tuesday showing updates and stuff and will probably have a clearer understanding of the release dates..
Looking forward to the update Dash.


Powered by EzPortal
SMF spam blocked by CleanTalk